As you read through the lessons you will find that the mechanics of creating quality photographs are quite easy. The trouble comes in when you have to apply all of these pieces of basic knowledge in a single instant; to create the photo that you see in your mind before the moment dissipates. The single most important piece of knowledge that I can share with anyone is simply to take a lot of photos. They won’t all be great, most won’t even be good, but the act of operating your camera needs to become instinctual. On that note, lets get acquainted…
Be advised, this series of lessons is based upon the assumption that you have and will be using an SLR (Single Lens Reflex) camera. The best way to learn the basics is to start with the basics so film is preferred for those of you that have a film body. If you do not own a film camera and have no desire to purchase one (they are pretty cheap) then I suggest placing gaffers tape over the LCD panel on the back of your digital camera. Seeing immediate results is an incredible advantage to digital shooting, unfortunately it can become your biggest crutch while you are still learning the basics. I promise it won’t be long before you can start playing with it but for now, just forget it’s there.
To get started lets discuss basic camera functions. Every camera is based on the same basic principals. A piece of light sensitive material is placed behind a curtain that prevents light from touching it. When the curtain is opened, the amount of light that touches that light sensitive material is recorded by the material itself. Based on this principle, we have two variables within our control:
- The sensitivity of the material behind the curtain and
- The amount of light that we allow to pass the curtain and be recorded by the material.
Pretty simple right? We only have to control two variables.
So how do we control the sensitivity of the material? We choose an ISO(International Standards Organization) rating. With film this number appears on the box and is typically between 100 and 3200. To start out just stick with the lowest ISO available to you, if you are using film start with 200 ISO(it is actually closer to 100 most of the time). The rating number indicates the sensitivity of the material. ISO 100 film requires twice as much light as ISO 200 film to achieve the same result and ISO 200 film requires twice as much light as ISO 400, etc.
Try not to get caught up in the how and why, just keep in mind that there is a measuring system and that system is incredibly accurate. Now, if we place ISO 100 film in our camera behind the curtain then open the curtain for 1 second we will achieve a certain shade of gray. If we open the curtain for 2 seconds that shade will be lighter and if we open the curtain for half a second that shade will be darker. This is your shutter speed. The shutter controls how long light is allowed to fall onto the film or digital sensor.
We have one more variable that allows us to control the amount of light passing the shutter. We place lenses on our camera to focus light from a particular scene onto the film or sensor, within the lens is a diaphragm. This diaphragm can expand and contract leaving a larger or smaller hole in its center for light to pass through, the hole is the aperture. The aperture controls how much of the available light is passing through the shutter while it is open. A larger hole allows more light to pass through itself and a smaller hole allows less.
Think of shutter speed and aperture like a faucet and the film or sensor like a glass. An 8oz glass needs half as much water to fill as a 16oz glass would. This is your ISO. Then, if you choose the 8oz glass and place it under the faucet you have two options to fill it. You could turn the faucet just a little and leave it running for a long time with a slow stream of water or you could open it all the way up and turn it off quickly. Either way you get the same amount of water in the glass.
That’s it folks, those are your camera functions. The only controls you have when you use a camera with available light. Now, how do you know how much light you need to allow in. This answer is a little complicated, so for now just use your light meter.
When you look through the view finder on your camera, underneath the image there is a bar with a + sign at one side and a – sign at the other. in the middle there is a 0. When your camera indicates 0 the scene in the view finder will be given enough light to be recorded as a middle tonal value. If you are using black and white film, 0 would be middle gray. So if the object is white you want the meter to slide to the + side of zero and if it is black you want the meter to slide to the – side of zero.
Now go try it. Don’t worry about Depth of Field and motion blur just try to get good exposures. if an object is light get a photo that the object looks light, if it is dark get a photo that looks dark and if its in the middle…
Good luck…
